Threats
CVEs published in the last 120 days, plus everything on CISA’s known-exploited list. Scores, exploit likelihood and exploitation status in one place.
| Score | CVE | Affected | EPSS | Published |
|---|---|---|---|---|
| — unscored | CVE-2026-99751 | Linux In the Linux kernel, the following vulnerability has been resolved: bpf: Fix skb_pull() BUG in __bpf_redirect_neigh() The issue: This is a follow-up to the short link-layer header fixes from Eric. After vlan pop_eth, a privileged SCHED_ACT BPF program can call bpf_skb_change_head(skb, 1, 0) and then bpf_redirect_neigh(). __bpf_redirect_neigh() calls skb_pull(skb, sizeof(*ethh)) after checking only that mac_header < network_header. Nothing verifies that the MAC header is long enough, that it is linear, or that the IP header the redirect goes on to read is linear either. A SCHED_ACT BPF program can do: bpf_skb_change_head(skb, 1, 0); bpf_redirect_neigh(lo, NULL, 0, 0); after vlan pop_eth. The skb then has mac_len == 1 and only one byte of linear data; skb_pull(ETH_HLEN) trips the skb->len < skb->data_len BUG in __skb_pull(): kernel BUG at ./include/linux/skbuff.h:2839! RIP: skb_pull+0x40/0x50 Call Trace: skb_do_redirect -> packet_xmit -> packet_sendmsg Kernel panic - not syncing: Fatal exception in interrupt The v4 and v6 paths read ip_hdr() and ipv6_hdr() as soon as the MAC header is gone. On the AF_PACKET frame below that leaves headlen == 0 after the pull, so the network header sits at skb->tail and the route lookup reads ip4h->protocol, ip4h->saddr and ip4h->daddr past the linear area. The Fix: Use skb_network_offset(), which is the MAC header span, instead of skb->mac_len. mac_len is zero for locally generated tc egress and netkit packets, while the span still rejects the one-byte header produced by pop_eth + bpf_skb_change_head(skb, 1, 0). The single check also covers the mac_header >= network_header test it replaces. Use pskb_may_pull() to make the Ethernet header linear before it is read or pulled, and to make the IP header linear in both the v4 and the v6 path before ip_hdr()/ipv6_hdr() is read. The header pointers are taken after the pull, since pskb_may_pull() may reallocate skb->head. Conditions to recreate the bug: On x86-64 with 4 KiB pages, enable CONFIG_PACKET, CONFIG_BPF_SYSCALL, CONFIG_NET_SCH_INGRESS, CONFIG_NET_CLS_MATCHALL, CONFIG_NET_ACT_VLAN and CONFIG_NET_ACT_BPF. Run as root with BPF loading, network administration and raw-packet privileges. Bring lo up and attach a SCHED_ACT program that calls bpf_skb_change_head(skb, 1, 0), then returns bpf_redirect_neigh(skb->ifindex, NULL, 0, 0): ip link set lo up tc qdisc add dev lo clsact tc filter add dev lo egress matchall action vlan pop_eth pipe \ action bpf object-file neigh_chghead.o section action Send an untagged ETH_P_IP frame of ETH_HLEN + 8192 bytes through an AF_PACKET/SOCK_RAW socket bound to lo, without PACKET_VNET_HDR or PACKET_QDISC_BYPASS. Use a unicast destination MAC. The sender's skb has a 14-byte linear Ethernet prefix and a fragmented payload; pop_eth removes that prefix and change_head restores only one linear byte. The unfixed neighbor redirect then tries to pull 14 bytes and BUGs. Sending the same frame without pop_eth and change_head leaves the IP header in the frags, which is the route lookup reading past skb->tail. | 0.18% | 20 Nov 2026 |
| — unscored | CVE-2026-99750 | Linux In the Linux kernel, the following vulnerability has been resolved: ksmbd: require DELETE access for delete-on-close opens smb2_open() accepts FILE_DELETE_ON_CLOSE on an existing file without DELETE in DesiredAccess. When the request asks only for FILE_READ_ATTRIBUTES or READ_CONTROL, it also skips inode_permission() and the parent directory MAY_WRITE | MAY_EXEC check that delete-on-close is meant to get. The file is then marked for deletion by a caller who could not delete it. The unlink happens later, in __ksmbd_inode_close(), when the last handle on the inode is closed, and it runs with the credentials of that handle. If the caller closes last, the unlink fails. If another user who can write the parent directory, such as the file's owner, still has the file open, the file is deleted when that user closes it. Until then new opens of the file fail with STATUS_DELETE_PENDING. So a user with only search permission on a directory can delete a file in it, or block opens of it, while the owner has it open. A MAXIMUM_ALLOWED open that also requests DELETE has the same problem. The requested access is replaced with the maximal access, which does not include DELETE when the caller cannot write the parent directory, and the later permission checks are skipped as already done. MS-FSA 2.1.5.1 requires an open with FILE_DELETE_ON_CLOSE and without DELETE in DesiredAccess to fail with STATUS_INVALID_PARAMETER, and Samba does the same. Add that check to the CreateOptions validation, using the generic-mapped DesiredAccess so that GENERIC_ALL still qualifies. This also refuses MAXIMUM_ALLOWED with FILE_DELETE_ON_CLOSE but no explicit DELETE, as MS-FSA and Samba do. When MAXIMUM_ALLOWED is requested with DELETE but the maximal access does not include DELETE, fail with STATUS_ACCESS_DENIED. With DELETE requested, delete-on-close opens go through the existing parent directory check. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99749 | Linux In the Linux kernel, the following vulnerability has been resolved: ksmbd: enforce the read-only share flag when creating a stream When a share is read-only, smb2_open() rejects opens that would create or truncate a file. Creating a named stream on an existing file with streams_xattr sets neither O_CREAT nor O_TRUNC, so it passes this check, and smb2_set_stream_name_xattr() then creates the stream. On a Time Machine share, opening a missing AFP_AfpInfo stream also writes one. A user who can write a file at the filesystem level can therefore add streams to it through a read-only share. Do not create a stream or synthesize AFP_AfpInfo when the share is not writable. Existing streams still open normally, and a missing stream opened with FILE_OPEN still returns STATUS_OBJECT_NAME_NOT_FOUND. | 0.16% | 20 Nov 2026 |
| — unscored | CVE-2026-99748 | Linux In the Linux kernel, the following vulnerability has been resolved: ksmbd: revert fsids on durable reconnect and replay failure On a durable handle reconnect or a request replay, smb2_open() switches to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at err_out1. The user's credentials then stay installed on the shared ksmbd worker. Later work on that worker, including other users' requests, runs with the first user's fsuid, fsgid and supplementary groups. ksmbd_free_work_struct() also warns, because work->saved_cred is still set. Jump to err_out1 instead. No path is held at this point, so skipping the path_put() at err_out is correct. | 0.16% | 20 Nov 2026 |
| — unscored | CVE-2026-99747 | Linux In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type() session_user_name() and session_account_type() dereference session->user without checking for NULL. A session can be published and exposed via the procfs session interface before authentication completes, during which session->user is NULL: show_proc_session() -> session_user_name(sess) -> user_guest(session->user) -> NULL->flags -> oops Guard both functions by treating a NULL session->user as an explicit not-yet-authenticated state rather than dereferencing it. | 0.19% | 20 Nov 2026 |
| — unscored | CVE-2026-99746 | Linux In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after hda_sdw_bpt_send_async() has already started the TX and RX DMA streams, intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly without calling hda_sdw_bpt_wait(). As a result, hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while the DMA hardware is still running. Disable any running TX or RX BPT DMA stream at the start of hda_sdw_bpt_close() before unmapping channels and depreparing DMA resources. | 0.16% | 20 Nov 2026 |
| — unscored | CVE-2026-99745 | Linux In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Select the BHI mitigation based on the attack vector properly The BHI mitigation selection is inconsistent with the documentation (attack_vector_controls.rst), which lists BHI under both the user->kernel and guest->host attack vectors. bhi_select_mitigation() only enables it when CPU_MITIGATE_GUEST_HOST is set; otherwise it selects BHI_MITIGATION_OFF, even if CPU_MITIGATE_USER_KERNEL is set. As a result, a kernel compiled with KVM disabled gets BHI automatically disabled, since CPU_MITIGATE_GUEST_HOST defaults to off without KVM. This is a bug, given that CPU_MITIGATE_USER_KERNEL still needs it: on affected Intel CPUs these kernels lose BHI_DIS_S or the BHB clearing loop by default. Booting with mitigations=auto,no_guest_host has the same effect. Select BHI_MITIGATION_ON whenever user->kernel is mitigated, and keep BHI_MITIGATION_VMEXIT_ONLY for the guest->host-only case. [ bp: Clarify commit title. ] | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99744 | Linux In the Linux kernel, the following vulnerability has been resolved: net: atl1c: drop oversized RX frames instead of panicking atl1c sizes its receive buffers from the netdev MTU plus a fixed set of L2 overheads, which comes to 1522 bytes at the default MTU. A link partner that sends a longer frame - in practice a MikroTik CCR2004-1G-2XS-PCIe, whose RouterOS side defaults to l2mtu 1600 while the host stays at MTU 1500 - makes the length reported by the RX return descriptor exceed what the hardware wrote, and skb_put() then either includes bytes that were never received or trips skb_over_panic and takes the host down. Compare the descriptor length against buffer_info->length, the length the hardware was given, rather than against skb_tailroom(): the skb carries 64 bytes of slack for the DMA erratum, so tailroom is larger than the DMA buffer and a frame in between would pass the check and still be delivered with a tail the device never wrote. The same test rejects frames shorter than ETH_HLEN + ETH_FCS_LEN; before this change a reported length below ETH_FCS_LEN underflowed in skb_put(). The frame is dropped with kfree_skb_reason(SKB_DROP_REASON_PKT_TOO_BIG) so drop_monitor and the kfree_skb tracepoint see it, and counted through dev_core_stats_rx_dropped_inc(), which survives atl1c_get_stats() overwriting the hardware counters on every read. It also counts as work: atl1c_clean_rfd() has already recycled the RFD, and the refill at the end of the poll only runs when work_done is non-zero, so sustained oversized traffic would otherwise drain the ring and stop RX. Tested on a MikroTik CCR2004-1G-2XS-PCIe (4x AR8151) in a Proxmox VE host, with atl1c built from a DKMS tree carrying this change: the l2mtu-1600 traffic that panics the stock driver is dropped and counted with the patch applied, and received normally once the host MTU is raised to match. This complements commit 36c2009d90f2 ("net: atl1c: fix soft lockup on out-of-range tpd_cons read"), which fixed the TX side of the same "host dies while the card resets" problem. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99743 | Linux In the Linux kernel, the following vulnerability has been resolved: ksmbd: grant a POSIX ACL group entry only to the group's members When no ACE of the DACL matches the caller, Everyone or Authenticated Users, smb_check_perm_dacl() falls back to the file's POSIX ACL. It takes the first ACL_USER or ACL_GROUP entry whose id equals the caller's uid. For ACL_GROUP, this compares a gid with the caller's uid. A numerical match grants the group's permissions even when the caller is not a member. Match a group entry only when the caller is also in the group. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99742 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: charge shared policy nodes Any local user can bypass memory.max with mbind() on a tmpfs file, and allocate unbounded kernel memory. mbind() sets a NUMA memory policy for a range of a mapping. If the mapping is of a shmem and friends, the kernel also stores the policy on the inode, in a tree with one entry per range of the file. Each mbind() on a single page of a mapping can add one shared policy node (struct sp_node) and one struct mempolicy to that tree. They outlive the mapping and stay around until the inode is destroyed. The tree is not bounded by the file size, so the file can be empty. Memory that user space can allocate must be charged to a memory cgroup. A slab cache does that for all of its objects if it is created with SLAB_ACCOUNT. numa_policy_init() creates the slab caches for both structs without SLAB_ACCOUNT, so they are not charged to any cgroup. Reproduced with mbind() on single pages of an empty tmpfs file, from a cgroup with memory.max=8M: the global OOM killer killed tasks owned by root, and the machine panicked. Fix this by creating both caches with SLAB_ACCOUNT. This change implies that mbind() can now fail when running into memcg limits. Further, the policy_cache also serves task and VMA policies, so they are similarly accounted now. Note that per-file limits are not really helpful, as the user could simply use many files; having limits per user is tricky as well. Fix generated by an LLM and submitted by Chris Mason in private. [ david: smaller description tweaks ] | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99741 | Linux In the Linux kernel, the following vulnerability has been resolved: tmpfs: keep the quota soft limits of an unused id When the last reference to a dquot goes away, shmem_release_dquot() stores its limits in the rb tree of the mount, unless shmem_is_empty_dquot() says that there is nothing worth storing. That function looks at the usage and at the two hard limits only. So if the administrator sets nothing but soft limits for an id that owns no file yet, the entry is thrown away as soon as the dquot that Q_SETQUOTA used is released, and the id never gets to see a limit. To fix it, compare the soft limits as well: an entry can be empty only if both soft limits are zero as well, which is exactly what shmem_acquire_dquot() sets for a new entry. Fix generated by an LLM and sent by Josef Bacik in private. [ david: slightly adjusted description ] | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99740 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/shmem: stop retrying folios that cannot be split A fault or collapse can insert a large folio crossing EOF after shmem_undo_range() has handled the boundary folios. If splitting that folio fails, truncate_inode_partial_folio() retains it when it is dirty. The final scan then repeatedly finds it because it restarts from an unchanged start. Truncation keeps the inode lock and ignores fatal signals while looping. A concurrent unlink() can then block other directory operations while holding the directory lock and waiting for the file's lock. Advance start past the retained folio, whose truncated part has already been zeroed. Do not move start backwards if the failed split has shrunk the folio. Fix generated by an LLM and sent by Chris Mason in private. [ david: split fixes, simplify descriptions, adjust comments ] | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99739 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix truncate hang in large swap entry Truncating a tmpfs file or memfd to a page-aligned size inside a large swap entry can loop indefinitely in shmem_undo_range(). The task holds the inode lock and cannot be killed. A large swap entry represents a whole swapped-out folio. For example, truncate a file whose pages 0-7 share one swap entry to four pages: [ 0 1 2 3 | 4 5 6 7 ] keep | discard ^ new EOF, start = 4 i_size has already been updated when boundary handling asks shmem_get_partial_folio() for page 4. Since it is swapped out, the helper calls shmem_get_folio() with SGP_READ. That rejects page 4 with -EINVAL because its starting offset equals i_size. Nothing is read back. The final scan cannot free the entry without losing pages 0-3. It skips it, restarts from start = 4, and finds it again indefinitely. An unaligned truncate avoids this particular failure because the requested page starts below i_size. Folios already in the page-cache cannot trigger it as the direct lookup will return them beyond EOF. Fix it by letting shmem_get_partial_folio() call shmem_swapin_folio() directly for swap entries. This bypasses the read path's i_size check, allowing the existing boundary handling to zero and split the folio. If swap-in returns a smaller folio, it also splits the swap entry so the final scan can free the entries beyond EOF. Retry the lookup if the entry changes during swap-in. Handling swap-in allocation failures remains broken and is unchanged by this commit. Even when shmem_swapin_folio() correctly returns -ENOMEM instead of -EEXIST, shmem_get_partial_folio() returns NULL and shmem_undo_range() skips boundary handling. If the large swap entry remains intact, truncation can still loop in the final scan, while hole punching can return without zeroing the boundary. This may read an entire large folio back from swap while holding i_rwsem, only to discard part of it. Avoiding that I/O would require splitting both the swap entry and any large folio still in the swap cache. That, however, is much bigger work. | 0.18% | 20 Nov 2026 |
| — unscored | CVE-2026-99738 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/shmem: preserve allocation errors when swapping in large entries shmem_swapin_folio() adjusts swap to the requested slot within a large swap entry before allocating a folio. If allocation or charging fails, the error path compares this adjusted value with the original entry still stored in the XArray in shmem_confirm_swap(). Unless the index is at the start of the entry, this turns -ENOMEM into -EEXIST even though nothing changed. The caller retries -EEXIST, so persistent allocation failures can leave the task spinning instead of returning the error. Restore swap to index_entry on allocation failure so the existing error path checks the original entry. This preserves the allocation error if the entry is unchanged and still retries if it changed concurrently. | 0.16% | 20 Nov 2026 |
| — unscored | CVE-2026-99737 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix truncate loop after boundary swapin failure If swapping in a large entry at the new EOF fails, shmem_undo_range() leaves the entry in place. Its final scan skips the entry, then restarts from the same start index and finds it again. Truncation can loop forever while holding i_rwsem. Advance start past the skipped entry so that a restarted scan can finish, as we already do for folios that cannot be split. Note that this does not fix the missing zeroing when boundary swapin fails, it merely prevents the endless loop. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99736 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix accounting of swapin-error markers A failed swap read replaces the swap entry with a swapin-error marker in the page-cache and subtracts its pages from "alloced" and "swapped"; however, it leaves their block charge in place. Removing the marker during truncate then subtracts from "swapped" again. This can underflow the counters or make swapped reach zero while other pages remain swapped out, causing swapoff to loop without finding them. When installing the marker, subtract only from "swapped" and let shmem_recalc_inode() reduce "alloced" and release the block charge. Make shmem_free_swap() report successful removal separately from the number of swap pages freed, so removing a swapin-error marker does not subtract from "swapped" again. It's a bit confusing, but replacing a swapped out page by a swapin-error marker in shmem_set_folio_swapin_error() behaves as follows: Initially: alloced=1, swapped=1, nrpages=0 Calling shmem_recalc_inode(inode, 0, -1) -> swapped = 0 -> freed = 1 - 0 - 0 = 1 -> alloced -= freed -> alloced=0, swapped=0, block charge released | 0.16% | 20 Nov 2026 |
| — unscored | CVE-2026-99735 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/mglru: don't use stack pointers when walking PUD and PMD tables MGLRU passes stack copies of page-table entries in walk_pud_range() and walk_pmd_range() when walking to the next level. These copies can become stale when khugepaged or MADV_DONTNEED (CONFIG_PT_RECLAIM) removes a PTE table concurrently. This pattern dates back to commit bd74fdaea146 ("mm: multi-gen LRU: support page table walks"). Likely, earlier locking masked the latent bug. Later changes exposed it: commit 1d65b771bc08 ("mm/khugepaged: retract_page_tables() without mmap or vma lock") allowed concurrent retraction, and commit cf4a65539c13 ("memcg-v1: no need for memcg locking for MGLRU") dropped the walker's outer RCU protection. The fix is simple, so just fix the original commit so we don't have to speculate. To fix it, pass the actual PMD/PUD pointers. This restores the RCU-protected lookup and validation against the live PMD. Note that the PUD handling is required as well to handle folded page tables correctly in all cases. Fix generated by an LLM and sent by Josef Bacik in private. [ david: handle walk_pud_range() as well, clarify+simplify description, adjust Fixes: ] | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99734 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/shmem: make shmem_file() check the file's inode shmem_file() only checks if file->f_mapping is a shmem mapping. This mapping can belong to another file, however, as with a Coda file backed by a tmpfs container after mmap(). So it does not guarantee that the file inode is an actual shmem inode. Seal handling and memfd preservation use this check before accessing shmem inode state, so they can access an inode of the wrong type. Let's make shmem_file() check the inode's file operations instead, to identify shmem inodes reliably. This will identify regular shmem inodes, including memfds and ordinary tmpfs files, independently of wrapper file operations. Use shmem_mapping() in collapse_file() instead to not change the behavior of collapse_file(): it operates on the page cache and uses mapping->host for shmem inode operations. Focusing on the file does not seem relevant. | 0.20% | 20 Nov 2026 |
| — unscored | CVE-2026-99733 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/truncate: look again if a folio left the mapping invalidate_inode_pages2_range() skips a folio which no longer belongs to the mapping by the time it has got the folio lock, on the assumption that somebody else has removed it from the page cache. But the folio may have been replaced, and then there is a new folio with the same data at that index. For most cases, like folio migration, that is impossible. However, collapse_file() only checks the refcount of the old folios, under the i_pages lock, and relies on their folio locks from there on. That works for users which repeat the lookup when they find folio->mapping changed. The following scenario is, however, possible: CPU0 pwrite(O_DIRECT) CPU1 collapse_file() kiocb_invalidate_pages() read the folio (old data), lock it refcount check the write completes copy to new_folio kiocb_invalidate_post_direct_write() find_get_entries() -> old folio xas_store(new_folio) folio->mapping = NULL folio_unlock(folio) folio_lock() folio->mapping != mapping -> continue In that scenario, the collapsed folio with the data from before the write stays in the page cache after the write has returned. This used to be impossible, as khugepaged only collapsed files that nobody had open for writing. Restart the lookup at that index, like shmem_undo_range() does. The same problem seems to exist in truncate_inode_pages_range() as well when truncate_inode_folio() fails, so handle it there as well, but slightly differently: simply check once more through find_get_entries(). | 0.16% | 20 Nov 2026 |
| — unscored | CVE-2026-99732 | Linux In the Linux kernel, the following vulnerability has been resolved: mm/filemap: read mapping->a_ops->free_folio under i_lock memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops after the inode has been freed. Once the folio is deleted from the pagecache it no longer pins the mapping, so after i_lock is dropped e.g., a concurrent final iput() can evict and free the inode before filemap_free_folio() looks up mapping->a_ops->free_folio. Most callers hold a reference on the inode, but not all. Documentation/filesystems/vfs.rst explicitly states that ->free_folio() must not assume the original address_space mapping still exists. Fix it by loading ->free_folio while i_lock is still held, similar to what folio_unmap_invalidate() does. Inline filemap_free_folio() into its remaining caller such that delete_from_page_cache_batch() also just loads the callback before dropping the i_lock. The bug was found by code inspection and has not been reproduced. Fix generated by an LLM and sent by Josef Bacik in private. [ david: get rid of filemap_free_folio() entirely; improve patch description ] | 0.16% | 20 Nov 2026 |