Threats
CVEs published in the last 120 days, plus everything on CISA’s known-exploited list. Scores, exploit likelihood and exploitation status in one place.
| Score | CVE | Affected | EPSS | Published |
|---|---|---|---|---|
| — unscored | CVE-2026-99691 | Linux In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: unlink socket containers before releasing resources A socket container's node and socket must remain alive while the container is on sock_containers. The debugfs formatter reads sc_node and sc_sock under o2net_debug_lock without taking their references, but sc_kref_release() releases both before taking that lock to unlink the container. With CONFIG_DEBUG_FS enabled, a synchronous sender can retain its last socket-container reference after o2net_disconnect_node() has detached the connection and flushed o2net_wq. The caller runs outside that workqueue. After the sender removes its configfs dependency, node removal can proceed without waiting for the sender's final sc_put(): Sender (final sc_put) Configfs rmdir Debugfs reader -------------------- -------------- -------------- o2nm_undepend_item() Drop node item refs o2nm_node_put() [node can be freed] sc_seq_show() Lock debug lock Read sc_node->nd_name Unlock debug lock sc_node = NULL o2net_debug_del_sc() The earlier socket release has a similar window. The container is still selectable while its socket has been released and sc_sock has not yet been cleared: Sender (final sc_put) Debugfs reader -------------------- -------------- sock_release(sc->sc_sock) [socket can be freed] sc_seq_show() Lock debug lock Read sc_sock->sk fields Unlock debug lock sc_sock = NULL ... o2net_debug_del_sc() Move o2net_debug_del_sc() before releasing either resource. Unlinking under the existing debug lock waits for an active formatter to finish and prevents later readers from selecting the container. This covers both socket fields and node fields, including nd_num in the stats formatter. KASAN report as below: BUG: KASAN: slab-use-after-free in string+0x42b/0x470 Read of size 1 at addr ffff88810f56fc90 by task python3/506 CPU: 0 UID: 0 PID: 506 Comm: python3 Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 kasan_report+0xe0/0x110 string+0x42b/0x470 vsnprintf+0x330/0x1110 seq_printf+0x1a8/0x260 sc_seq_show+0x604/0x9f0 seq_read_iter+0x480/0x1110 seq_read+0x362/0x5a0 full_proxy_read+0x11f/0x180 vfs_read+0x1a0/0xc20 ksys_read+0x111/0x200 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f (User register dump omitted.) </TASK> Allocated by task 497: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 o2nm_node_group_make_item+0xea/0x1a0 configfs_mkdir+0x762/0xca0 vfs_mkdir+0x399/0x7e0 filename_mkdirat+0x129/0x450 __x64_sys_mkdir+0x70/0xa0 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 505: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 config_item_cleanup+0x14b/0x230 config_item_put+0x79/0x90 sc_put+0x454/0x6e0 o2net_send_message_vec+0x63d/0x1560 o2net_send_message+0xa6/0xe0 validation_send_write+0x17f/0x1d0 full_proxy_write+0x11f/0x180 vfs_write+0x25a/0x1010 ksys_write+ ---truncated--- | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99690 | Linux In the Linux kernel, the following vulnerability has been resolved: ocfs2: cache the mount context for dentry lock callbacks ocfs2_drop_dentry_lock() drops the inode reference before releasing the DENTRY lock. This lets inode eviction release the local inode and open locks before a remote unlink can proceed past the DENTRY lock. A DLM callback can still arrive before the DENTRY lock has been dropped. ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb, which can access a freed inode when the downconvert thread drops the last inode reference in its post-unlock callback: Downconvert thread DLM callback thread ------------------ ------------------- ocfs2_process_blocked_lock() ocfs2_dentry_post_unlock() ocfs2_dentry_lock_put() ocfs2_drop_dentry_lock() iput(dl->dl_inode) [inode reclaimed after RCU] ocfs2_blocking_ast() ocfs2_get_dentry_osb() dl->dl_inode->i_sb ocfs2_simple_drop_lockres() Store the mount context in the DENTRY lock resource's l_priv field and use the default mount-context lookup. Recover the containing dentry lock with container_of(), as already done for refcount locks, and remove ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before freeing the mount context, so callbacks can use it without accessing the inode. Preserve the existing iput-before-unlock order to avoid delaying local inode and open lock release until after the DENTRY lock is released. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99689 | Linux In the Linux kernel, the following vulnerability has been resolved: xfs: fix temporary cursor leak in btree shift corruption paths In xfs_btree_lshift and xfs_btree_rshift, when XFS_IS_CORRUPT detects an invalid firstrec/lastrec result after xfs_btree_dup_cursor has successfully allocated a temporary cursor, the error path jumps to error0 which returns without freeing tcur. This leaks the cursor memory, the xfs_group reference, and the per-level buffer references held by the duplicated cursor. Jump to error1 instead, which calls xfs_btree_del_cursor(tcur, XFS_BTREE_ERROR) to properly release all resources. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99688 | Linux In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: prevent aggregate self-replacement qfq_change_class() snapshots the current aggregate settings while holding the qdisc tree lock, but drops the lock before selecting the destination aggregate. During that gap, qfq_enqueue() can move the class to an aggregate matching the requested settings. When qfq_change_class() resumes, qfq_find_agg() then returns cl->agg. If it is a singleton, qfq_deact_rm_from_agg() frees the aggregate before qfq_add_to_agg() immediately accesses the same pointer, causing a use-after-free. While holding the tree lock, skip the replacement when the destination is already the current aggregate. Any estimator replacement has already completed, so the class change can finish normally. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99687 | Linux In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: zero misaligned I/O bounce pages The misaligned I/O fallback copies the full bounce scatterlist to the request buffer during completion. If a data-in command transfers less than requested, part of a newly allocated bounce page can remain unwritten. Allocate bounce pages with __GFP_ZERO so all bytes copied during completion have a defined value. This path is already the slow fallback for misaligned I/O, so the added initialization cost is acceptable. Found during an LLM-assisted source audit and validated with a QEMU/KVM vhost-scsi target using misaligned data-in commands. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99686 | Linux In the Linux kernel, the following vulnerability has been resolved: vhost: fix used ring index wrap in vhost_add_used_n_in_order vhost_add_used_n_in_order() advances start by nheads[i] but wraps it with a single subtraction. If start + nheads[i] >= 2 * vq->num, start can remain outside the ring. With used-ring logging enabled, start > vq->num makes (vq->num - start) underflow. log_write() then sets bits beyond the dirty-log bitmap, potentially corrupting adjacent userspace memory. This is reachable on the vhost-net TX path with VIRTIO_F_IN_ORDER: done_idx can reach VHOST_NET_BATCH (64), triggering the issue with a 32-entry ring. Wrap start with a mask to keep it within the ring. VHOST_SET_VRING_NUM enforces a nonzero power-of-two ring size, allowing start to be wrapped using & (vq->num - 1). | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99685 | Linux In the Linux kernel, the following vulnerability has been resolved: iommu/virtio: Reset device before deleting virtqueues on probe failure viommu_probe() marks the device DRIVER_OK before populating the event virtqueue and registering the IOMMU device in sysfs. viommu_fill_evtq() hands the device a set of device-writable buffers through virtqueue_add_inbuf(), so from that point on the device may write into them and into the rings. If either step fails, the error path deletes the virtqueues without resetting the device first. The event buffers are allocated with devm_kmalloc_array() and are released as probe unwinds, so the device can go on writing to memory that has been freed. Reset the device before deleting the virtqueues, the way viommu_remove() already does. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99684 | Linux In the Linux kernel, the following vulnerability has been resolved: hwrng: virtio - prevent use-after-free after a failed restore remove_common() frees the driver data during freeze, but does not clear vdev->priv, which points to freed memory. If probe_common() then fails during restore, a later remove or freeze can dereference the dangling pointer. Clear vdev->priv on the probe_common() error cleanup path and before freeing the driver data in remove_common(). Also reset the device and return early from remove_common() if vdev->priv is already NULL for a safe teardown after a failed restore. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99683 | Linux In the Linux kernel, the following vulnerability has been resolved: vduse: fix VA/PA confusion in the coherent page fault path vduse_domain_get_coherent_page() assumes that iotlb entries above bounce_size were installed by vduse_domain_alloc_coherent(), so it treats map->addr as a physical address. But vduse registers with use_va = true, and when the device is bound to vhost_vdpa, vhost_vdpa_va_map() stores a userspace virtual address in map->addr, which vduse_domain_set_map() then copies into the same iotlb. A process holding the domain file descriptor across a rebind can therefore fault in an arbitrary physical page with read/write access, ignoring the entry permissions. Additionally, since the domain file mmap lacks VM_IO, the domain file itself can be mapped and passed to vhost_vdpa_va_map(), producing self-referential entries that bypass the coherent path check. To fix, only translate entries whose backing file is the domain file itself in vduse_domain_get_coherent_page(), reject such entries in vduse_domain_set_map() since only external mappings should be imported, and set VM_IO on the domain file mmap so vhost_vdpa_va_map() refuses to map it in the first place. | 0.18% | 20 Nov 2026 |
| — unscored | CVE-2026-99682 | Linux In the Linux kernel, the following vulnerability has been resolved: virtio_blk: use synchronous quiesce in virtblk_freeze_priv() blk_mq_run_work_fn() can call blk_mq_sched_dispatch_requests() through blk_mq_run_dispatch_ops(). The dispatcher checks QUEUE_FLAG_QUIESCED while the flag is clear. It can then be preempted before it gets a request. At that time, it has no queue usage reference, so blk_mq_freeze_queue() does not wait for it. virtblk_freeze_priv() then calls blk_mq_quiesce_queue_nowait() and blk_mq_unfreeze_queue(). A new request can enter the queue. The old dispatcher can run again, use its old flag check, get the new request, and call virtio_queue_rq(). At the same time, virtblk_freeze_priv() can reset the device, delete the virtqueues, and free vblk->vqs. The old dispatcher can then use a deleted virtqueue or a NULL vblk->vqs, and the kernel can crash. Fix this by using blk_mq_quiesce_queue(), which waits for dispatch code that was already running. Keep the existing freeze and unfreeze order. The queue remains quiesced until virtblk_restore_priv() calls blk_mq_unquiesce_queue(). | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99681 | Linux In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99680 | Linux In the Linux kernel, the following vulnerability has been resolved: xfs: mark the inode preallocated for pNFS write layouts past EOF xfs_fs_map_blocks() marks the inode XFS_DIFLAG_PREALLOC only when it allocates blocks for a write layout. A write layout past EOF can also hand out allocated blocks, such as speculative preallocation. blockgc then frees them under the layout, and another file may get them. Mark the inode whenever a write mapping ends past EOF. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99679 | Linux In the Linux kernel, the following vulnerability has been resolved: xfs: refuse a pNFS LAYOUTCOMMIT of a range without blocks A client can commit a hole in a LAYOUTCOMMIT, because nfsd does not check the extents against its layouts. xfs_iomap_write_unwritten() then allocates written blocks there. A large hole overruns the block reservation and shuts XFS down. A small one exposes stale data. Refuse such a range with -EIO, using XFS_BMAPI_CONVERT_ONLY. | 0.16% | 20 Nov 2026 |
| — unscored | CVE-2026-99678 | Linux In the Linux kernel, the following vulnerability has been resolved: xfs: cap the block count of xfs_iomap_write_direct() at one extent xfs_iomap_write_direct() reserves blocks for the whole count in an unsigned int. For a pNFS layout the client chooses that count, and an RW LAYOUTGET for 16 TiB wraps the reservation and shuts XFS down. xfs_bmapi_write() maps at most XFS_MAX_BMBT_EXTLEN blocks here, so cap the count at that. nfsd asks again for the rest. The other callers get the same mapping as before. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99677 | Linux In the Linux kernel, the following vulnerability has been resolved: xfs: clamp the pNFS layout range to the maximum file size xfs_fs_map_blocks() lets two bad layout ranges through. An offset of 2^63 or more is negative and passes "offset > limit". A length above the limit, such as NFS4_UINT64_MAX, wraps "offset > limit - length" and stays unclamped. With NFS4_UINT64_MAX, a read layout is built from an uninitialized mapping. Reject a negative offset and one at the limit, and clamp the length. This needs "xfs: cap the block count of xfs_iomap_write_direct() at one extent". | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99676 | Linux In the Linux kernel, the following vulnerability has been resolved: net: restore refcount ordering for lockless socket access Before commit fb041bb7c0a9 ("locking/refcount: Consolidate implementations of refcount_t"), default builds implemented refcount_inc_not_zero() using atomic_add_unless(), which provided full memory ordering on success. The commit removed that ordering on weakly ordered architectures, allowing accesses after a successful reference acquisition to be reordered before it. Use refcount_inc_not_zero_acquire() in the IPv4 and IPv6 established lookups and in inet_twsk_purge(), where the socket is validated again after taking a reference. bpf_sk_assign() can receive a socket pointer obtained through BTF without a reference. Use acquire ordering when it takes its own reference for a refcounted socket. Use refcount_set_release() when setting refcounts in the SYN cookie, TCP Fast Open, request migration, and TIME_WAIT paths. Keep the existing TIME_WAIT smp_wmb(), which separately orders the refcount store before ehash publication. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99675 | Linux In the Linux kernel, the following vulnerability has been resolved: nvmet: reject keep-alive timeouts that would overflow nvmet_set_feat_kato() and nvmet_alloc_ctrl() convert the 32-bit millisecond KATO from the host to seconds with DIV_ROUND_UP(kato, 1000). The addition in DIV_ROUND_UP() is done in 32 bits, so any KATO above 4294966296 ms wraps around and rounds to 0 seconds. A Set Features command with KATO 0xffffffff then succeeds but disables the keep-alive timer: Get Features returns 0 and Keep Alive fails with Keep Alive Timeout Invalid. A Connect command with such a KATO creates a controller without a keep-alive timer. The converted value has more consumers that can overflow. Get Features multiplies it by 1000, and the timer paths multiply it by HZ in 32 bits and arm a delay that must not exceed MAX_JIFFY_OFFSET. Reject a KATO whose rounded value does not fit all of these. Return Keep Alive Timeout Invalid from both Set Features and Connect. Validate Set Features before stopping the current timer so a failed update leaves its timeout unchanged. Round in 64 bits. A KATO of 0 keeps its current meaning. | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99674 | Linux In the Linux kernel, the following vulnerability has been resolved: can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Sending a PF_PACKET bypasses the CAN framework logic and can directly reach a CAN driver's xmit() function. The PF_PACKET framework only checks that skb->len does not exceed the net_device MTU. For a CAN device that is not CAN XL capable, anything above CANFD_MTU (72 bytes) is therefore dropped before it reaches the driver. However, CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to 2060 bytes. As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes can pass both the MTU and the can_dropped_invalid_skb() checks. A driver that does not support CAN XL will interpret canxl_frame->flags as a length because of the overlap with can_frame->len. And because CANXL_XLF is set, the resulting length is between 128 and 255. For drivers that do not check can_frame->len before copying can_frame->data, as most drivers do, this results in a buffer overflow of up to 247 bytes. Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs. | 0.20% | 20 Nov 2026 |
| — unscored | CVE-2026-99673 | Linux In the Linux kernel, the following vulnerability has been resolved: can: replace ARPHRD_CAN type checks with can_get_ml_priv() Commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") introduced an explicit way to assign the midlayer private pointer (dev->ml_priv) to named users like ML_PRIV_CAN. A valid pointer returned by can_get_ml_priv() therefore identifies a real CAN device. The referenced commit only converted the j1939 and proc code to this check, while the other parts of the CAN subsystem still rely on dev->type == ARPHRD_CAN. The TUNSETLINK ioctl allows a down TUN/TAP device to set its hardware type to ARPHRD_CAN while dev->ml_priv remains NULL. Such a repurposed netdevice passes the ARPHRD_CAN checks. Commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") already made can_rx_register() reject such devices. But can_rx_unregister() still only checks dev->type and dereferences the NULL ml_priv when it walks the receive lists of the device. CAN_ISOTP reaches this path: isotp_bind() ignores the return values of can_rx_register() and binds the socket anyway. When the socket is released or the device is unregistered, isotp_release() and isotp_notify() remove the filters that have never been registered and trigger the NULL pointer dereference in can_rx_unregister(). This only requires owning a TUN/TAP device or CAP_NET_ADMIN in an unprivileged user namespace. Convert the remaining ARPHRD_CAN checks in af_can, bcm, gw, isotp and raw to can_get_ml_priv(). | 0.17% | 20 Nov 2026 |
| — unscored | CVE-2026-99672 | Linux In the Linux kernel, the following vulnerability has been resolved: can: protect the receive lists with a per-device lock The receive lists of a CAN device are located in the device's can_ml_priv and travel with the device when it is moved to another network namespace. But they are protected by the per-netns rcvlists_lock. So can_rx_unregister() needs dev_net(dev) to pick the right lock and silently returns when the passed namespace does not match dev_net(dev) anymore. isotp_release() and bcm_release() leave their notifier list before they take any lock that serializes against the netdev notifier, which runs under RTNL. When the bound device is moved to another namespace in this window, the notifier skips the socket and the release path has to remove the filters itself. isotp_release() passes the socket's namespace, which does not match dev_net(dev) anymore. bcm_rx_unreg() passes dev_net(dev), which can_rx_unregister() reads again for its check, so a namespace change between both reads makes the check fail as well. In both cases can_rx_unregister() silently returns. As can_rx_register() stores rcv->sk without a reference, the remaining receivers point to the freed socket (isotp) or the freed op (bcm): BUG: KASAN: use-after-free in isotp_rcv+0x1570/0x24d0 Read of size 1 at addr ffff888118130552 by task isotp_ns_uaf/578 can_rcv_filter+0x4af/0x8c0 can_receive+0x28d/0x3c0 can_rcv+0x2a9/0x310 __netif_receive_skb_one_core+0x21a/0x260 process_backlog+0x210/0x760 Besides this, the lists of a device are protected by the rcvlists_lock of the namespace that is passed in. Callers which pass dev_net(dev) read it at different times, so the same lists may be modified under the locks of different namespaces while the device is moved. Taking RTNL in these release paths is no option: raw_bind(), raw_setsockopt() and raw_release() already hold RTNL while adding and removing up to CAN_RAW_FILTER_MAX filters per socket, which unprivileged users can trigger repeatedly and which makes RTNL a global bottleneck. Instead fix the root cause and add a spinlock to struct can_dev_rcv_lists, which protects the receive lists of a CAN device or the 'any' CAN device lists of a namespace. It is initialized in can_set_ml_priv(), which is used by all CAN network devices. With this, can_rx_unregister() finds the subscription independently of the current namespace of the device. The protocols keep the device valid with their tracked references. The per-netns rcvlists_lock only protects the receive list statistics anymore, and CAN_RAW, CAN_BCM and CAN_ISOTP pass the namespace that has been used for can_rx_register(). So isotp_release() and bcm_release() now remove their filters correctly without RTNL, and raw_release(), raw_setsockopt(), raw_bind() and isotp_bind() do not need RTNL anymore and add and remove their filters under lock_sock(). To serialize bind() with NETDEV_UNREGISTER, bind() publishes the device inside the RCU section of its lookup, and raw_notify() and isotp_notify() recheck the bound device under lock_sock(). As RTNL does not keep NETDEV_DOWN out of bind() anymore, bind() checks IFF_UP after publishing the bound device, with a barrier pair against raw_notify() and isotp_notify(), so a down transition during bind() is still reported with ENETDOWN. | 0.17% | 20 Nov 2026 |